FILE NO. SVM-06006
– 35 –
8-3. Installation
8-3-1. Optional installation parts
<Fixing bolt arrangement of outdoor unit>
• Secure the outdoor unit with fixing bolts and nuts if the unit is likely to be exposed to a strong wind.
• Use ∅8 mm or ∅10 mm anchor bolts and nuts.
• If it is necessary to drain the defrost water, attach Drain nipple ! and Cap water proof
to the bottom plate of the outdoor unit before installing it.
Part
Code
A
B
C
Q'ty
One
each
1
One
each
Parts name
Refrigerant piping
Liquid side : ∅6.35 mm
Gas side : ∅12.70 mm (18 Class)
: ∅15.88 mm (24 Class)
Pipe insulating material
(polyethylene foam, 6 mm thick)
Putty, PVC tapes
108 mm
600 mm
29 mm
25 mm
90 mm
125 mm
325 mm
86 mm
116 mm
Drain outlet
Air inlet
Fig. 8-3-1
Air outlet
13
To Next Page
Loading...
