FILE NO. SVM-06006
– 40 –
• Rear side piping with Drain hose. (Recommended
direction)
Fig. 8-4-14
1. Cut or remove the determined direction slit or cover.
2. Pipes and the Drain hose should be fixed together
by the Drain band with two screws.
Fig. 8-4-15
• Other direction piping.
1. Cut the slit of connecting only upper direction.
Fig. 8-4-16
2. Connect the Flexible pipe " to the large pipe (Gas
side).
Fig. 8-4-17
Cut
<Piping and Drain hose installation>
• The piping direction can be 4 ways as illustrated.
• The Drain hose is only one way.
Fig. 8-4-11
• How to install the Drain hose.
1. Remove the two screws and the Drain band.
2. Cut a slit for the drain hose hole.
Fig. 8-4-12
3. Place the Drain hose on the U- shape space and
secure it with the Drain band and two screws.
Fig. 8-4-13
Rear piping hole ∅80
Ceiling
Wall
Ceiling
175 mm
or more
140 mm
Screws
Drain band
Slit for drain hose hole
Side piping
Upper piping
Rear upper piping
Rear piping Drain hose
Slit for upper piping
Cover for rear
upper piping
Drain hose
Cover for side piping
Big pipe
""
""
" Flexible pipe
To Next Page
Loading...
