– 5 –
FILE NO. SVM-04008
Note : 1
• Capacity is based on the following temperature conditions.
Note : 2
• Charge refrigerant according to the table below.
RAS-24UKHP-E3 / RAS-24UAH-E3 RAS-18UKHP-E3 / RAS-18UAH-E3
RAS-24UKP-E3 / RAS-24UA-E3 RAS-18UKP-E3 / RAS-18UA-E3
Refrigerant RAS-24UKPX3 / RAS-24UAX3 RAS-18UKPX3 / RAS-18UAX3
RAS-24UKP-AR3 / RAS-24UA-AR3 RAS-18UKP-AR3
/ RAS-18UA-AR3
RAS-24UKPX3-T / RAS-24UAX3-T RAS-18UKPX3-T2 / RAS-18UAX3-T2
*1 No need to charge
15 m or less 15 m or less
extra refrigerant
*2 Need to charge
Over 15 m up to 25 m (30 g/m) Over 15 m up to 20 m (20 g/m)
extra refrigerant
Temperature
Condition
JIS C9612-1994
Cooling Heating
Indoor unit inlet air temperature
(DB) 27°C 20°C
(WB) 19°C 12°C
Outdoor unit inlet air temperature
(DB) 35°C 7°C
(WB) 24°C 6°C
To Next Page
Loading...