EasyManua.ls Logo

Toshiba RAS-B10GKVP-E - Installation Environment and Electrical Safety

Toshiba RAS-B10GKVP-E
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
EN
WARNING
Never modify this unit by removing any of the safety guards.
Do not install in a place which cannot bear the weight of the unit. Personal injury and property damage can result if the unit
falls.
Before doing any electrical work, attach an approved plug to the power supply cord and make sure the equipment is
grounded.
Appliance shall be installed in accordance with national wiring regulations.
If you detect any damage, do not install the unit. Contact your Toshiba dealer immediately.
CAUTION
Exposure of unit to water or other moisture before installation may result in an electrical short. Do not store in a wet
basement or expose to rain or water.
After unpacking the unit, examine it carefully for any damage.
Do not install in a place that can increase the vibration of the unit. Do not install in a place that can amplify the noise level of
the unit or where noise or discharged air might disturb neighbors.
To avoid personal injury, be careful when handling parts with sharp edges.
Please read this installation manual carefully before installing the unit. It contains further important instructions necessary for
proper installation.
Wear work gloves when carrying out the installation work or repairs. Contact with parts, etc. may cause injury if the work or
repairs are conducted without wearing gloves.

Other manuals for Toshiba RAS-B10GKVP-E

Related product manuals