7
Fan motor
No. Part name Procedure Remarks
1. Detachment
1) Perform works of 1 of .
2) Remove connectors for fan motor
wiring from control P.C. board.
CN210 : Fan motor (7P, White)
NOTE
First unlock the housing and then
remove the connectors.
3) Remove the fixing screws of the fixing
plate (2 pcs.) at the side of the fan
motor. (Ø5 x 10, 2 pcs.)
4) While supporting the fan motor by
hands, remove the the fan motor.
2. Attachment
1) Attach as before in fan motor 䊻㻌
motor fixing plate 䊻 electric part box
cover order.
Attach the connector, then perform
wiring as original.
5
The fixing plate
Rein forced pate
(80 to 160 type only)
To Next Page
Loading...
