Toshiba RAV-HM401CTP Series - Manual Address Setup - Continued; Indoor Unit and Group Address Setup

<Indoor unit address>
6 Push the [menu] button until the CODE No. flashes. And using the [ or ] buttons,
specify the CODE No.13.
7 Push the [menu] button until the SET DATA flashes. And using the [ or ] buttons, set
an indoor unit address.
8 Push the [OFF timer] button to confirm the SET DATA.
<Group address>
9 Push the [menu] button until the CODE No. flashes. And using the [ or ] buttons,
specify the CODE No.14.
10 Push the [menu] button until the SET DATA flashes. And using the [ or ] buttons, set
a group address.
If the indoor unit is individual, set the address to 0000. (header unit : 0001, follower unit :
0002)
Individual :0000
Header unit :0001
Follower unit :0002
11 Push the [OFF timer] button to confirm the SET DATA.
12 When all the settings have been completed, push the [ON/OFF] button to return to normal
mode.
} In case of group control
- 98 -