– 7 –
CAUTION
This Air Conditioner has adopted a refrigerant HFC (R32)
which does not destroy the ozone layer.
• As the R32 refrigerant is easily affected by impurities such
as moisture, oxidized film, oil, etc., due to the high pressure,
be careful not to allow the moisture, dirt, existing refrigerant,
refrigerating machine oil, etc., to get mixed up in the refrigeration
cycle during the installation work.
• A special tool for the R32 refrigerant is required for installation.
• Use a new and clean piping materials for the connecting pipe
so that moisture and dirt are not mixed together during the
installation work.
• When using existing pipes, follow the installation manual
enclosed with the outdoor unit.
(*1) Refer to the “Definition of Qualified Installer or Qualified
Service Person”.
2 Accessory parts
Part name Q’ty Shape Usage
Installation Manual 1 This manual
(Hand over to customers)
(For other languages that do not appear in this Installation
Manual, please refer to the enclosed CD-R.)
Owner’s Manual 1
(Hand over to customers)
(For other languages that do not appear in this Owner’s
Manual, please refer to the enclosed CD-R.)
CD-ROM 1 -— Owner’s Manual and Installation Manual
Heat insulating pipe 2
For heat insulation of pipe connecting section
Installation pattern 1 — Drawing-out port of hanging bolt pipe
Washer 4 M10 × Ø25 For holding down unit
Hose band 2
For connecting drain pipe
Drain hose 1
For connecting drain pipe
Bushing 1
For protection of edge at power taking-in port
Heat insulator 1
For heat insulation of drain hose (10 t × 190 × 190)
Heat insulator of top plate 1
For upper pipe hole of indoor unit (6 t × 120 × 160)
Banding band 6
For heat insulation of pipe connecting section (n=4) and
drain hose heat insulator (n=2).
To Next Page
Loading...
