Recording
Recording variations for many types of programmes or
situations.
Before recording
Programming a recording (REC
MENU)
Programming a recording (EPG)
Recording a TV programme
Recording an external source
Deleting recorded contents
Others
Hint on reading this manual
The following icons show the playable discs for each
function described on this instruction manual.
HDD
: HDD
DVD-RAM
: DVD-RAM disc
DVD-RW
(VR)
: DVD-RW disc (VR mode)
DVD-RW
(Video)
: DVD-RW disc (Video mode)
DVD-R
(VR)
: DVD-R disc (VR mode)
DVD-R
(Video)
: DVD-R disc (Video mode)
DVD-VIDEO
: DVD video disc
VCD
: VIDEO CD
CD
: Audio CD
Most instructions are based on remote control operation,
unless otherwise noted. You can use the buttons on the
remote control and those on the main unit as well when
they have the same function.
If copy protection signal is detected during
recording on this recorder, the recording
automatically pauses and a message appears. In
this case, the PAUSE button cannot release the
recording. (It is possible to end the recording by
pressing the STOP button.) If the copy protection
signal continues, the recording will terminate.
Notes
• Note that all recording content may be deleted if the
unit is disconnected from a wall outlet, or a power
failure occurs, during recording.
• If a power failure occurs within 5 minutes prior to the
programmed recording start time, the programmed
recording may not be executed.
RD-85DT_Ope_E_p031-044 3/27/06, 19:4031
To Next Page
Loading...
Need help?
General
