Toshiba S2E21 - Auto Learning and Time Constant Settings

TOSHIBA
6F9EOlll
34-1 +
P34 SETTING
*AUTO LEARNING*
34-Z --)
1st
0
34-3 --t Tst 0
34-4 + TR 0
34-5 + TD 0
lo. I tern Description
State at
de I i very
34-l Setting Sets whether or not automatic detection is -
needed.
34-2 Starting Automatically detects the starting current and 0
current specifies whether or not the detected value is
taken as the starting current setting.
Enter either 0 (OFF) or 1 (ON).
When 0 (OFF) is entered, the detected starting
current is displayed (P4) but the input value,
not the detected value, is used as the setting
value in the starting current setting (P25).
When 1 (ON) is entered, the detected starting
d&rent is displayed (P4) and also taken as the
setting value in the starting current setting
(P25).
$
z
3
i
- 17 -
www . ElectricalPartManuals . com