Toshiba S2E21 - Page 5

TOSHIBA
6F9EOlll
D-1
&2
30-l +
P30 SETTING
RY O/P SEL.
- (01 NOPi.& ;;;.
0
E%
UC
INST
UB
g
SPARE1
SPARE2
-
- -
-
m
jetting
\larm output
+ 30-3
30-3 A
-
Item
Description
Sets the operation condition for the output
relay.
Selects a unit that drives the alarm output
relay when an alarm is detected.
Enter either "0" (not operate) or "1" (operate).
The output is an ORed output of alarm detections
from the unit that drives the alarm output
relay.
Locked-rotor has no alarm. But it isdetected
as an overload (OL) alarm instead.
Zate at
leiivery
I
www . ElectricalPartManuals . com