Toshiba S2E21 - Page 50

TOSHIBA
6F9EOlll
Ir
or
Or
On
On
Phenomenon
-
:D indicates
l8.
-
I LCD indicator
I PO
Second cannot
be set.
-
1 P2
The displa:y
does not
change while
the metered
value changes.
8 R remains
0.
UB remains
0.
/ P3
999 is
displayed.
P4
I s t (4-3)
and
T s t (4-4)
remain at 0.
Check point
3rror LED is lit.
3rror LED is not
lit.
Lt lower part of
CD,
‘ >>>SELECT P2 <<<"
is indicated.
I'SC (25-2) on
'25 is 0 (OFF).
UB (23-2) on
'23 is 0 (OFF).
s item measured
n the temperature
*an@ between 2OC
lnd 2E?
lotor has not been
;tarted more than
'ive times. and
earned function is
:elected.
Possible cause
Setting value is
incorrct.
Normal.
Normal.
The page is being
turned.
Normal.
Change value from zerc
Normal. Change value from zero
Cable conection is
bad.
Normal.
#hat to do
Press the [EXE] key
and enter all setting
values again. (NOTE)
Display other pages.
(See Section 5.3.1.)
The second setting
is not provided.
Press the [EXE1 key tc
change to the display
mode.
Firmly connect cable
and connector.
The measured value is
displayed after the
motor is started five
times.
NOTE: Pressing the [EXE] key returns the setting to those values set at time
of delivery.
- 97 -
www . ElectricalPartManuals . com