4.7 Wireless LAN Unit 4 Replacement Procedures
Detroit 20 /Detroit 20E Series Maintenance Manual [CONFIDENTIAL] 4-17
Installing the Wireless LAN Unit
To install the wireless LAN unit, follow the steps below and refer to the figures in the
preceding section.
1. Remove the black M2.5x4 screw securing the wireless LAN door, and then remove it.
CAUTION: Do not touch the connectors on the wireless LAN unit or on the
computer. Debris on the connectors may cause malfunction.
2. Fit the wireless LAN unit connector into the computer’s connectors and secure it with two
black M2.5x3 screws.
3. Place the wireless LAN unit in the wireless LAN holder and gently press down. Secure
the wireless LAN unit with two M2.5x4 screws.
4. Attach the white antenna to the main connector, and the black antenna to the Aux
connector.
5. Use the black M2.5x4 screw to secure the wireless LAN door.
To Next Page
Loading...
