3.15 LAN Test 3. Tests and Diagnostics
3-23 Satellite A110 Series Maintenance Manual
3.15 LAN Test
The LAN test checks the LAN full-duplex environment.
NOTE: LAN loopback needs to plug in before test begins.
And LAN information will show on the test screen:
IO Base – Port: A000H
IRQ – BH, it’s “IRQ 10”.
Node – it is “MAC Address”.
Line Frame – 1514 Bytes.
Line Speed – 100Mbps or 10 Mbps.
Bus ID – it’s “4”.
The LAN test includes two subtests of the:
1. Speed100
- Including Ethernet_802.2, Ethernet II, Ethernet SNAP and Ethernet_802.3. All
test items are in LSB mode.
2. Speed10
- Including Ethernet_802.2 in LSB mode.
The subtests run automatically.
To Next Page
Loading...
