3. Tests and Diagnostics 3.17 LAN Test
3-26 Satellite A80 Series Maintenance Manual
3.16 LAN Test
The LAN test checks the LAN full-duplex environment.
NOTE: LAN loopback needs to plug in before test begins.
And LAN information will show on the test screen:
? ASIC register Check:
? MAC register check:
? .PHY register check:
? .PHY IRQ(PCI) check:
? Check buffer RAM over register access:
? Test Rate Control .
The LAN test includes three subtests of the:
1. Speed1000
- including ASIC Loopback (Speed=1000)
2. Speed100
- including ASIC Loopback (speed=100)
3. Speed 10
- including ASIC Loopback (Speed=10)
The subtests run automatically.
To Next Page
Loading...
