3.15 Lid Switch Test 3. Tests and Diagnostics
Satellite A80 Series Maintenance Manual 3-23
3.14 Lid Switch Test
The lid switch test checks the lid function of the unit. When LCD cover closed, the lid should enable to
turn off the display.
NOTE: Remember to tune up the volume as “Maximum” before this test starts.
Follow below steps to run this test:
1. Close the LCD cover.
2. Heard 3 “Beep” sound happened during LCD closed.
3. Open the LCD.
Then it will indicate whether the test is passed or failed.
To Next Page
Loading...
