3.5 PIO Loopback Test 3. Tests and Diagnostics
Satellite A80 Series Maintenance Manual 3-9
3.5 PIO Loopback Test
The PIO loopback test will check below items through PIO loopback connector.
? External Interrupt
? External Loopback
- including Pattern test, Data Pin test, Control register test & Control pin/ Status pin test.
NOTE: Remember to connect a PIO loopback connector to the computer's printer port
before test begins.
The screen should display as below, indicating whether the test is passed or failed when finished.
To Next Page
Loading...
