4 Replacement Procedures
4-6 Satellite A80 Series Maintenance Manual
Tools and Equipment
The use of Electrostatic Discharge (ESD) equipment is very important for your safety and the safety of
those around you. Proper use of these devices will increase the success rate of your repairs and lower
the cost for damaged or destroyed parts. The following equipment is necessary to disassemble and
reassemble the computer:
? One M2 Phillips screwdriver to remove and replace screws.
? One T5 security screwdriver.
? Tweezers, to lift out screws that you cannot grasp with your fingers.
? ESD mats for the floor and the table you are working on.
? ESD wrist strap or heel grounder.
? Anti-static carpeting or flooring.
? Air-ionizers in highly static sensitive areas.
To Next Page
Loading...
