4 Replacement Procedures
Satellite A80 Series Maintenance Manual 4-29
4. Detach Speaker cable.
Figure 4-26 Removing Speaker cables
5. Remove the top cover.
Installing the Top Cover
To install the top cover, follow the steps below and refer to the figures in the preceding section.
1. Seat the top cover and secure three FFC cables.
2. Connect Speaker cable.
3. Secure the top cover with two black M2.5x5 and four black M2.5x14 screws.
4. Secure the seven black M2.5x8 and seven black M2.5x5 securing from bottom.
To Next Page
Loading...
