User’s Manual 8-3
Optional Devices
3. Insert the ExpressCard.
4. Press gently to ensure a firm connection.
5. Check the configuration in the HW Setup window to make sure it is
appropriate for your card.
Figure 8-3 Inserting the ExpressCard
Removing an ExpressCard
To remove the ExpressCard, follow the steps below.
1. In Windows
7, open the Safely Remove Hardware and Eject Media
icon on the system tray and disable the ExpressCard.
2. Press the ExpressCard slightly to make it stretch out.
3. Grasp the ExpressCard and pull it out from the slot.
Figure 8-4 Removing the ExpressCard
1.EXPRESSCARD SLOT
THE CARD’S SHAPE DEPENDS ON THE CARD YOU PURCHASED.
1.EXPRESSCARD*
*T
HE CARD’S SHAPE DEPENDS ON THE CARD YOU PURCHASED.
To Next Page
Loading...
