User’s Manual F-2
TOSHIBA PC Health Monitor
Once enabled, you may disable the TOSHIBA PC Health Monitor at any
time by uninstalling the software via Uninstall a program in the Control
Panel. Doing so will automatically delete all collected information from the
HDD.
The TOSHIBA PC Health Monitor software does not extend or modify
TOSHIBA's obligations under its standard limited warranty in any way.
TOSHIBA's standard limited warranty terms and limitations apply. Visit
http://www.warranty.toshiba.com
for details.
Starting the TOSHIBA PC Health Monitor
The TOSHIBA PC Health Monitor can be started using the following
methods:
■ Click Start → All Programs → TOSHIBA → Utilities → PC Health
Monitor.
■ Click the icon ( ) in the notification area. Click “Enable PC Health
Monitor...” message when it is displayed.
■ Click “TOSHIBA PC Health Monitor is not enabled. Please click
here for more details” message when it is displayed.
No matter which method is used, the TOSHIBA PC Health Monitor
explanation screen will be displayed.
Clicking “Next” will display the “
PC Health Monitor Software Notice &
Acceptance
” screen. Please carefully read the information displayed.
Selecting “ACCEPT” and clicking “OK” will enable the program. By
enabling the TOSHIBA PC Health Monitor software, you agree with these
terms and conditions and to the use and sharing of the collected
information. Once the program is enabled, the TOSHIBA PC Health
Monitor screen is displayed, and the program will begin monitoring system
functions and collecting information.
This message will no longer be displayed after enabling TOSHIBA PC
Health Monitor.
To Next Page
Loading...
