User’s Manual 8-9
Optional Devices
4. Remove one screw securing the memory module cover.
5. Lift off the cover.
Figure 8-8 Removing the cover
6. Insert the memory module into the connector on the computer. Press
the module carefully and firmly to ensure a solid connection.
7. Push the module down so that it lies flat and is secured by two latches.
Figure 8-9 Inserting the memory module
■ Use a point size 0 Phillips screwdriver.
■ Insert the two memory modules of the same specifications and
capacity into Slot A and Slot B respectively. The computer will operate
in dual channel mode. You can access the inserted memory modules
efficiently in dual channel.
■ Slot A is reserved for main memory; Slot B is for expanded memory. If
only one memory module is installed, use Slot A. Slot A is lower than
Slot B.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
To Next Page
Loading...
