4 Replacement Procedures Error! No text of specified style in document. Error! No text of
specified style in document.
4.24 Camera Module
Removing the Camera Module
Remove the Camera Module according to the following procedures and Figure 4.40.
Peel the camera module off the LCD cover assembly.
ormal module
3D module
Figure 4.40 Removing the Camera Module
NOTE: Camera module is fastened by adhesive tape. Remove it slowly and carefully.
Installing the Camera Module
Install the Camera Module according to the following procedures.
NOTE: Take extra care in routing cables and antennas on the LCD module. Improperly routed
cables can become pinched or damaged and cause malfunction.
Seat the camera module on the LCD cover assembly and press down to make sure it is
adhered to the LCD cover assembly.
[CONFIDENTIAL] Satellite P770/P775 Series Maintenance Manual
To Next Page
Loading...
