4 Replacement Procedures Error! No text of specified style in document. Error! No text of
specified style in document.
4.21 Display Assembly
Removing the Display Assembly
CAUTION:
Use care to avoid the antenna cable being caught between the display assembly and the
laptop.
Remove the display assembly according to the following procedures and Figures 4.33.
1. Peel away the tape securing the four antenna cables (black, white, blue and red) and the
LVDS cable, and pull the cables from the routing channels on the logic lower assembly.
2. Remove the four M2.5x5 screws securing the display assembly.
3. Remove the display assembly from the logic lower assembly.
M2.5×5*4
Figure 4.33 Removing the screws
[CONFIDENTIAL] Satellite P770/P775 Series Maintenance Manual
To Next Page
Loading...
