Error! No text of specified style in document. Error! No text of specified style in document. 4
Replacement Procedures
4.18 Logo Board
Removing the Logo Board
Remove the Logo board according to the following procedures and Figure 4.28.
1. Disconnect the logo board FFC from the motherboard.
2. Gently pry up the logo board FFC.
Figure 4.28 Disconnecting the logo board FFC from the motherboard
3. Remove the logo board from the logic lower assembly.
Installing the Logo Board
Install the logo board according to the following procedures.
1. Seat the logo board in the logic lower assembly.
2. Connect the logo board FFC to the motherboard
Satellite P770/P775 Series Maintenance Manual [CONFIDENTIAL] 4-39
To Next Page
Loading...
