40
heating a video tape _ vcRDVD
!i i
If you connect _heDVD/VCR 1oanothe VCR or Camcorde you can duplicate _2
a previously recorded tape Make all C°rmecti°ns before tuning on the power _ /
_4
ii ; i
Preparation:
• Turrl ON the TV and select the correspond ng video
input
• P_ess VCR DVD seledor to sebct he VCR mode
(The VCR indicator wil__ight )
• Load a cassette tape with the erase prevention tab
intact
• Load a previously recorded tape into the 114ay_ack
VCR or Camcorder
Press SP/SLP to select the desired tape speed
SP or SLP
SP/SLP I is reconq_-ended that yo_, set the
pLAy MODE
O _ape speed to the SP nlode on the
ecording VCR for best results
Press iNPUT SELECT once or twice to select
AUDIOIVIDEO input position
LI' o_L2' wil appear in the dispay
kl on the rear panel
L2 on the front pane
Press PLAY on the playback VCR or Camcerder.
Press REC on the recording VCR.
The d,,p icating p ocess begns
REC_OTR
O
Press STOP after duplicating a video tape
_eording a DVD/CD disc
You car record d_scmaterla i DVD A_db CD etc or,to a Video
ape wth this DVDNCR
Connection with second VCR
Playback VCR
Connection with Camcorder
Plavbac_CamcoTder
Recording VCR
J
WDSO IN AdDIONIDEO cablemot supp_ed)
For dupl caring a prewous_y recolded tape from a
camco_er _]ow the camcorder manufacturel s
instructions A typical camco_er dubbing hookup is
shown above
42
_" _ CAUTION ]
I,,._Pktyinga dise ...............................................
@Y_'] his section shows yo_,the basics on how to play a d_sc Neglecting to do so rlay cause set o_,s pe so_,a injqt_
Preparations:
• When you want o view a disc turn on _heW and select the corresponding video input connec ed to the DVD/VCR This
may _nclude S v_deo or component video inputs which are exclusive to DVD playback
• When you want _oenjoy _hesound of discs from the audio s ¸stem¸ _urnon _heaudio system and select the input
connected to the DVD/VCR
Press ON/STANDBY (110).
o,,, _'_, The DVD'VCR t_rnson
@
Press VCR/DVD SELECT to select the DVD mode•
VCa_VD The DVD nd cater wil_ light
O
Place the disc on the disc tray•
With the p_ayback
side down
• There are two differen disc sizes Place the disc
in the cored guide on the disc tray If the disc is
out of the gude, it may damage the disc and
cause the DVD_VCR to malfunction
• Do not place a disc which s unplayable in this
DVD VCR
Press OPENtCLOSE or PLAY on the unit•
The dsc tray doses automat_ca{ly
OP._LOS _IAY On the TV screen • changes to
OR @ "Reading and then playback
commences
• A menu screen win appea_ on the TV screen, if
the disc has a menu feature
Press STOP to end playback
STOP * The unit records the stopped point,
depending on tile disc '1_
appears on the screen P_ss
PLAY to _sume playback (f_m
the scene point}
• if you press STOP again or un!oad
the disc (' • • appears on the
sc_en }, _e unit wil_clear the
stopped point
• To start playback in the stop mode
P_ss PLAY
pLAY
<9
_4
Preparation:
Turn ON the TV and select the ten.spending video
input
Press VCR DVD se_ec_r to select the VCR mode
(The VCR indica_r wi_ light )
Load a cassette tape with the erase prevention tab intact
Load a DVDiCD disc
Press SP/SLP to selecl the desired tape speed
SP or SLP.
PLAY MOD_
O
Press VCR DVD selector to select the DVD mode.
The DVD indicate wil light
VCR
DVD
Press PLAY to start p_ayback
Press REC to start recording.
The DVD/VCR will change to the
REC/OTR VCR mode automatically and _he
O p_ayback p_cture or sound will be
duplicated on the video cassette
tape
Press STOP if you finish recording.
_fyou wish to sto_ a DVD/OD disc
(_ press VCR DVD selector to change
the DVD mode¸ _en _ress STOP
Notes:
• You may not be able to record the beginn ng of the disc
Begin VCR eco ding once program playback commences
or the DVD
• When the scanning mode s se to the _rogressive mode
you cannot du_l care a d_sc material onto a video tape
When RECiOTR is pressed, the PROGRESSIVE indicator
_' on the display window will flash and Please Set
Off' will appear on the screen
• Yol, can not record discs encoded wth copy guard
function The following icon and _e×t wll show up on the
TV scree_
DISC IS COPY PROTECTED
vcmDVD
_ OPEN'CLOSE
il !i
i! ii
PLAY
_P_E s_L_
STOP
• To obtain a higher quality picture
Occasionally some picture noise not usua_!y visib!e during a norn/a_ bloadcast
may appear on the TV screen while p_aying a DVD video disc because the high
resolution pictures on these discs include a lot of information While the amount of
noise depends on the TV you use with this DVD_VCR, you should ge_/erally
reduce the sharpness adjustment on your TV when viewing DVD video discs
• About _(_::_
The _:_i_:_ icons on tile heading ]3at show the p_ayable discs for the
function described unde_ that heading
You can _se 1his 1unct_or_w_h DVD v_deo d_scs
@ You can use th_s function with Video CDs
@ You can use this function with Audio CDs and CD R_RW CDs
• To pause playback (stil} mode)
Press PAUSE/STILL during playback
PAUSE/STILL To resun/e norma_ playback press
the PLAY button
, The sound is muted during still
mode
• TO stop playback
P_ss STOP
• To remove the disc
Press OPEN/CLOSE
OPEN/CLOSE Remove the disc after the disc tray
Q opens tom plete_y
Be sure to press the OPENiCLOgE butlon to dose
the d_sc t_y after you remove the disc
9
411
431
Notes:
• ff a non compatible dsc s loaded, '_ncortect Disc" 'Region Code Erro¢ o_' Parental Error will appea on the TV screen
according _ the type of loaded disc In this case, check your disc again (See pages 8 and 6/)
• Some discs may take a minute or so _ sta_l playback
• When you set a single _ced d_sc_a_el downwa_s (_e the wrong way up) and press _e OPEN/CLOSE butch or _he PLAY
but_n on the unit ¸'Reading ¸'will appear on the display _r 3Oseconds and then 'Incorrect Disc ¸'wi_l continue _o be displayed
• Some discs may not work _he_sum_ng facilit_
• Resuming canno_ function when you p_aya PBC featured V_deoCD whi_ethe PBC is on To turn off _hePBC see above
• Some playback operations of DVDs may be _ntentional_y fixed by softwa_ _roducers Since this unit plays DVDs according
the disc conten_s the software _ducers designed¸ some p_ayback features may not be available Also r_f_r _ the
instructions suppl_ed w_th the DVDs
• Do not move _heDVD/VCR du_ng playback Doing so may damage the disc
• Use the OPEN/CLOSE butch _oopen and dose the disc t_ay Do not push _hed_sctray whi_e i_is moving Doing so may
cause the DVD/VCR _o malfunction
• Do not push u_ on the disc tray o_put any objects other than d_scson the disc tray Doing so may cause the DVDNCR
malfunction
• _nmany instances¸ a menu screen will appear after p_ayback of a movie is completed Prolonged display of an on scTeen
menu may damage _ur television set permanently etching that image on_ its screen _ avoid this¸ be sure _ p_ss the
ON/STANDBY (I/',_) bu_n on _ur remote cont_l once the movie is completed
• There may be a s_igh_delay between you press4ng the bu_ton and _hefunction activating
• Ptaying a Disc while the VCR section is
recording or standing by for timer recording
I) Sta_ to record
Fo_ow steps 15 on page 34
•Ifthe DVD _/CR is standing by fur recording, turn on
the DVD/VCR
2) Press VCR DVD seledor to seled DVD mode The
DVD indicator wi_ Hght
3) Play a disc
Fo_low steps 3 - 5 on page 42
•Press PLAY if the DVDNCR does not start tu play a
disc automatically
4} Stop to play
Press STOP to stop play back a disc
• Screen saver function
The screen savel operates when you leave the u_it in
DVD stop ,'rode for about five m n_tes
The screen wil_ _epeatedly get dark gradually and back _,
to nom_a_ _
• To turn off the PBC
Press number b_tton / in the stop mode then press
ENTER
To Next Page
Loading...
