The AUTO CLOCK function will automatically set the built in clock
(Month Day Year and Tree) when the DVD/VCR s connected to an
Antenna or Cabe system and it s turned off The DVD/VCR searches for
a station in your area contain ng the necessary AUTO CLOCK setLing
signals Once received, t will take approx malely 4 m nutes fo the cock
to set itself automatically
AUTOCLOCKsetting ]1TosetAUTOCLOCKtoo. 'J
When shipped from factory theAUTO CLOCK is _t to 'ON'
Preparation: B_,t f you do not want AUTO CLOCK setLing:
Press VCR MENU.
VCRMENU
SETUP
(:22)
Press SET + or - to select "SYSTEM SETUP",
then press ENTER.
Press VCR MENU repeatedly to return to the
normal screen
• When the AUTO CLOCK is set to
VCR MENU
SETUP 'OFF' the A TO CLOCK adjust
Q merit does not funct on
• Set the cock ma_-ual y
Turn ON the TV a nd select the co]_espondJng video input
Press VCR DVD selector to select the VCR mode
(The VCR indicator win light )
Connect the Antenna or Cable system.
• If you use a cable box turn it on
Plug the AC Power cord to the AC outlet¸
Make sure the DVD/VCR is turned off.
• If you press POWER¸ the Auto Clock
Q set is no_programmed
Wait at least three minutes and press
POWER.
Q
Press CALL to check the clock setting on
the on screen display.
CALL
if the clock is not set check the antenna
condition. The AUTO C LOCK may not
function properly if the reception condition
is not good.
AUTO CLOCK adjustment
L ........................................................................................................................................
The auto clock adjustment will be updated at 6:00
AM, 12:00 PM and 6:00 PM everyday when the
DVD/VCR turned off.
• If you use a cable box and you want AUTO CLOCK
adiustment to be per;ormed, the cable box must be
_efton
• The AUTO CLOCK adjustment is not effective when
there is a difference of more than 5 m}nutes exists
between the built Jrrclock time and the actua_ time
124
iiii'i_ii_i',i,_iii!iiii
L,._goek setting (continued)
If the AUTO CLOCK process hid rot sei the date and th'e correct y
you must set them manualy for timer recording ard DAYLIGHT
SAVING TIME
Ma,ua! c!°ck Sett!ng .........................................................................................................................................................
EXAMPLE: Settng the clock to 830 AM Mural/
27 (SAT)¸ 2004
Press VCR MENU.
VCRMENU
SETUP
O
Press SET + or -to select "SYSTEM SETUP',
then press ENTER.
_HS_J_
Press SET + or - to select 'CLOCK SET",
then press ENTER.
Press SET + or - to set the month, then press
ENTER.
26
_nthe rare event that you live within broadcast range of two
stations _ntwo different time zones¸ the DVD/VCR ma
recognize the wrong s_ation for the AUTO CLOCK setting
co_ect the s_uation
Press VCR MENU
VCRMENU
SETUP
0
Press SET + or - to select "SYSTEM SETUP",
then press ENTER.
[ Toset STANDARD TIME ! [TosetDAYLIGHTSAVINGTIME !
You can set _he DAYLIGHT SAVING TiME automatically or
manually
Press VCR MENU.
Press SET + or - to select "SYSTEM SETUP",
then press ENTER¸
VCR MENU
SETUP
0
Press SET + or - to select "STANDARD TIME _',
then press ENTER.
Press SET + or - to select your time zone,
then press ENTER.
ATLANTIC : GMT 4hours
EASTERN :GMT 5hou[s
CENTRAL :GMT 6hou[s
MOUNTAIN GMT 7hours
PACIFIC GMT 8hours
ALASKA GMT 9hou[s
HAWAI GMT /0hours
AUTO :AUTO SET
(GMT: Greenwch Men Time)
2 'ie°:;'r::'sE T' "I"
3 PrpliSSnS,ETe+n_pre_°E%TEtRtpee°sfsthecR
MENU until the MENU screen is cleared.
ON: for manual setting
(forward one hour)
VCR[,4ENU OFF: for manual setting
SETUP (back one hour)
Q AUTO: for automatic setting
(read XDS in the s_gna_)
When you want to se_ the DAYLIGHT
_ SAVING TIME manually on _he first
Sunday in April you set to 'ON_ and
on the _ast Sunday _nOctober you se_
to ¸'OFF '¸
Set the day, year and time as in step 4.
5 PressalVsCRreMeE[qUtwi ............ the
VCRM_NU
S_TUP
CZ3
Notes:
• When shipped from factory= the DAYUGHT SAVING TIME is
Notes: set o 'AUTO" positior
• Tu be able to select the standard time the cock must fist be • When the clock is not set DAYUGHT SA\qNG TIME setLing
se by AUTO CLOCK once s not available
• ff you lye in Newfo_,ndland and the AUTO CLOCK does not , When thee is no DAYUGHT SAWNG T_ME n your aea a
function prope ly se the AUTO CLOCK menu option to 'OFF" ways select ' OFF' position n step 3
and set the clock manua lY 251
This DVDNCR is equipped wth achannel memory feature whch allows
channels to skip up or down to the next channel se_ into memory,
sk _p ng eve unwan ed channe s Before selecting channels¸ they must
be programmed into the DVD/VCR's memory In addition to norr-al
VHF and UHF channels, _hisDVD/VCR can receive up to I13 Cable
TV channels To use thin DVDNC R w_than antenna¸ set the TV/CATV
m_n_ opt_o_t_ the TV mo_e When sh_pp_ _m tb4_f_t_ th_sme_
option is _nthe CATV mode
ii!_L_;I_!_IfILlii
iiii%i!
TV/CATV selection ] [ Setting channels automatically
After setting the clock, date and time starts
functioning automatically.
ITo make corrections any time during the process
Press CANCEL repeatedly urdJl the item you want to
d_ange blinks then press SET + or -
Note:
Afte a power fa lure or d sconnection of the power the time
settings will be lost In this case reset the p esent time
Preparation:
Turn ON the TV and seiect to the coHesponding
video input
Press VCR DVD selector to select the VCR mode
(The VCR indicator win light )
Press VCR MENU. Press SET + or - to select"CH SETUP", then press ENTER.
VCRMENU
SETUP
CC)
4 :,;=;dVcRMENUon,,,th...........is
VCRMENU
SETUP
CD
You cantselect'CH SETUP'_fyou setthe channelto'Llor
,L2,
Repeat left step 1 and press SET + or - to
select "AUTO CH MEMORY"
Press ENTER
Auto tuning will begin The channel dis
play wil_ count up and when finished
the screen _etums to no_mal
2,I
To Next Page
Loading...
