DISASSEMBLY INSTRUCTIONS
B1-2
1
FE Head
2
VCR Deck
2
3
3
1-4: VCR DECK (Refer to Fig. 1-4)
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
NOTE
1.
2.
3.
4.
5.
6.
7.
Remove the screw 1.
Remove the FE Head.
Move the Cassette Holder Ass’y to the back side.
Remove the 2 screws 2.
Remove the 2 screws 3.
Disconnect the following connectors:
(CP101, CP102, CP3001).
Remove the VCR Deck in the direction of arrow.
Fig. 1-4
1-5: VCR PCB (Refer to Fig. 1-5)
1.
2.
3.
4.
5.
Remove the screw 1.
Remove the 5 screws 2.
Remove the 2 screws 3.
Remove the Shiel Jack.
Remove the VCR PCB in the direction of arrow.
1
2
3
2
2
2
2
VCR PCB
3
Fig. 1-5
Shield Jack
CP101
CP102
CP3001
To Next Page
Loading...
