CONFERENCE CALLS
(contimed)
TO CONFERENCE UP TO FOUR STATIONS
AND ONE CO LINE
CB
Lift handset.
0
Depress an available
a
line key.
Q
Dial the desired telephone number.
0
Depress the
-1
key after the party answers.
0
Depress an available
m
key, and call the station(s)
to be included in the conference call.
0
Advise the station(s) of the number of the CO line and
tell them to depress that
m
key when its LED begins
the distinctive conference flash.
e
Depress the
m
line key.
a
Depress the
El
key
(CO
line LED changes to
conference flash).
Q
The LED will then change from conference flash to
“I”-use indication when the other station enters the
conference.
*
Depress the
-1
key again if a third station is to
enter the conference call.
@
Repeat for a fourth station, if necessary.
@
Hang up when the conference call is completed.
TO CONFERENCE THREE OR FOUR STATIONS
AND ONE INTERCOM LINE
@
Using the intercom, advise the third and fourth
parties of the conference. Tell them to depress the
appropriate
m
key when its LED begins the
distinctive conference flash.
0
Using the intercom, call party
#2.
8
Depress the
-1
key
-
LED will change to
conference flash at all stations.
@
The LED will then change from conference flash to
”
I “-use indication when the third station enters the
conference.
@
Depress the
-1
key again to allow a fourth party
to enter.
@
Hang up when the conference call is complete.