Toshiba Strata VI - Conference Calls

TOSHIBA
CONFERENCE CALLS
TO CONFERENCE ONE STATION
AND TWO CO LINES
B Lift the handset.
B Depress an available m line key.
@ Dial the desired telephone number.
a Depress -1 key after the party answers.
B Depress a second available (COI line key.
e Dial the second party’s telephone number.
e Depress the -1 key after the second party
answers.
* Depress original m line key.
e Station is now connected to both m lines.
(P Hang up when conference call is completed.
TO CONFERENCE TWO OR THREE STATIONS
AND TWO CO LINES
e Lift handset.
B Depress an available m line key.
@ Dial the desired telephone number.
@ Depress the -1 key after the party answers.
B Depress a second available m line key.
e Dial the second party’s telephone number.
B Depress the IHOLD) key after the party answers.
@ Depress an available m key, and call the station(s)
to be included in the conference call.
@ Advise the station(s) of the number of the second CO
line and tell them to depress that m key when its
LED begins the distinctive conference flash.
@ Depress the second m line key.
0 Depress the -1 key (CO line LED changes to
conference flash 1.
* The LED will then change from conference flash to
“I”-use indication when the other station enters the
conference.
e Depress the -1 key again if a third station is to
enter the conference call.
0 After station(s) has entered, depress the IFj key,
and then the first m line key.
8 Hang up when the conference call is completed.