r
EXECUTIVE TELEPHONE (continued)
TELEPHONE NUMBER
STORAGE
TO STORE TELEPHONE NUMBERS
e
Lift the handset (do not activate a CO or INT line).
e
Depress the
m
and
m
keys, respectively.
o
Depress one of the
m
keys or dial a Z-digit address
code (codes run consecutively from IO through 49:
AD numbers reside at
43-491.
*
Dial telephone number to be stored.
It is necessary to insert a pause after the trunk access code
to allow for dial tone delay. Depress the
m
key after
entering the PBX access code. If a PBX feature access code
is being stored, a timed flash may be stored by depressing
the
(KJ
key.
e
Depress the
m
key to record number in memory.
e
Repeat the above steps with every number to be
stored (up to
401.
e
Return the handset to on-hook.
e
Write down the address codes and telephone
numbers for future reference.
Repeat this procedure to replace stored telephone numbers
with new ones.
To Next Page
Loading...
