Toshiba Super MMY-MAP0801HT7 - Page 46

46
In cooling operation
In cooling operation, use the air outlet flap with
horizontal set point so that the cold air diffuses in
whole room.
In heating operation (For Heat-pump model only)
In heating operation, use the air outlet flap with
downward set point so that the hot air blows at the
foot.
[Floor Standing Cabinet Type]
[Floor Standing Type]
<Adjustment of air direction upward/downward>
In cooling operation
In cooling operation, move the flap with hands and use it with horizontal
air outlet point so that the cold air diffuses in whole room.
In heating operation (For Heat-pump model only)
In heating operation, move the flap with hands and use the air outlet flap
with downward set point so that the hot air blows at the foot.
<Adjustment of air direction rightward/leftward>
Lift up the vertical flap lightly, direct it toward the desired direction, and lower it.
In this case, do not use the Swing function.
1
2
In this case, do not use the
swing function.