T3400, T3400CT
4.11 Keyboard
Removal
To remove the keyboard, follow the steps below and refer to Figures 4-19 and 4-20.
1. Turn off the power and disconnect the AC adapter, power cord, and all external
cables.
2. Remove the battery pack, optional memory card, optional PCMCIA card, and top
cover as described in sections 4.2 through 4.5.
3. From the top (keyboard) side, use a thin object to pry up the left and right sides of
the plastic panel slightly, then pry open and release the other latches, starting near
the ends and working toward the center (Figure 4-19).
Figure 4-19 Unlatching the Plastic Panel
To Next Page
Loading...
