Toshiba TC-net 100 - 3.1. DCOM and Security Settings

16 Information and Control Network TC-net 100 Optical Shared Hub Unit UTNH23A/B User’s Manual
Chapter 3 Setting
3
After registering the main unit and modules to connect using [Configuration Editor], save
the settings using [File (F)] and [Save (S)].
Close [Configuration Editor], select a system (not stations) to register using the Product
View. Execute [View (V)] and [Configuration Editor (C)] to open the window shown
below.
Double-click [Connecting Configuration (LAN)].
Click [TC-net 100 LANd(0)] in the Connecting Configuration (LAN) window, and register a
hub to connect to the LAN.