6F8C1406 25
4.2 TC-net 100 Cabling
4
4.2.2 Twisted-pair cable
Connect twisted-pair cables to the modular connectors with RJ45 connector (TX-0, DUAL
MENT).
(1) Remove the dust cover from the modular connector to connect. Hook the top edge of
the dust cover with a fingernail, and pull it out.
Figure 4-5 Removing Dust Cover from Modular Connector
(2) Insert a twisted-pair cable with RJ45 connector into the connector till it clicks.
Figure 4-6 Connecting Twisted-Pair Cable
(3) Clamp the twisted-pair cable.
To Next Page
Loading...
