Composition parts for DMD chip attachment .
These assigned as spare parts.
[DMD block assembly]
DMD chip and a DMD socket are coalesced.
Attention)
In replacement of DMD, it takes
measures against static electricity,
such as a list strap.
Coalesced the DMD chip and the DMD socket a put
on an engine frame.
DMD Board is pilled up.
Attention)
(Remove the dust from DMD and feld lens by applying air presurs,
(Wipe DMD terminal side by cling Alcohol to prevent bad contact.
(The removed heat conduction sheet is not used again.
11
12
13
14
15
DMD chip
DMD Board
To Next Page
Loading...
