(6)
(7)
(8)
(9)
(12)
(10)
(4)
(2)
(3)
(1)
(11)(5)
Name : Function
(1) Camera head : Document camera.
(2) Camera lens : Shooting lens for the document camera.
(3) Focusing lever : Adjusts the focus.
(4) Camera arm : Adjusts the shooting angle.
p.36
(5) Lock lever : Used when the document camera is detached from the
tray.
(6) CAMERA button : Toggles between the camera input and previous input.
p.36
(7) CAMERA GAIN buttons : Adjusts the camera gain.
p.36
(8) Tip resistant bar : Pulled out when a camera is used separated from the
projector.
(9) Camera output terminal : Used connect the supplied document camera cable to
(CAMERA OUT) the COMPUTER IN (camera) terminal of the projector.
(
10
) Tray : The document camera is mounted.
(
11
) Lock lever : Locks the document camera onto the tray.
(
12
) Lock switch : Used when the document camera is attached/detached
to/from the tray.
Names of each part on the document camera
(TDP-S21)
6