Troubleshooting
You use this section to diagnose problems with the projector. Choose the problem you
are trying to diagnose from the list below. The Power, Image and Audio sections
provide a variety of symptoms, while the other include only one page.
1. For Power problems , see page 53
2. For Image problems, see page 57
3. For Audio problems, see page 61
4. For Remote Control problems, see page 64
5. For Keypad problems, see page 65
6. For Menu problems, see page 66
7. For Camera problems, see page 67
Troubleshooting Power Problems
No standby LED
No lamp
At least some fans
are running.
Lamp or projector
shuts off after
running a short
period of time.
What is the
roblem ?
The projector will not power up,only partially
power up, or will not remain powered up.
53
To Next Page
Loading...
