Rev.02
Lighting pattern of Card indicator for TW90 and SW20 series
1. Card indicator (LED)
Card indicator LED is placed next to
the PCMCIA card slot.
It indicates whether the PC card is
available in normal condition.
TDP-TW90 TDP-SW20
2. Lighting pattern
Color or state Lighting pattern Blink times Condition
●
Off Continuous N/A Power off / PC card cannot be recognized.
●
Green Continuous N/A PC card is working.
●
Green Blink Constantly F/W updating was successfully completed.
●
Green Blink 1 N/A
●
Green Blink 2 N/A
●
Green Blink 3 N/A
●
Red Continuous N/A PC card has been removed from a card slot
before a user presses the UNMOUNT button.
●
Red Blink Constantly F/W updating has been failure.
●
Red Blink 1 N/A
●
Red Blink 2 H/W error or communication error between
main PCB and Network PCB.
●
Red Blink 3 Internal error.
●
Orange Continuous N/A Projector is “writing” mode.
●
Orange Blink Constantly N/A
●
Orange Blink 1 N/A
●
Orange Blink 2 N/A
●
Orange Blink 3 N/A
Notes)
- Applicable to projectors which have the same wireless module as the TDP-TW90 inside.
- When LED lights in orange color, it may be reddish orange.
13
To Next Page
Loading...
