Troubleshooting Image Problems
The image is not correct.
The projector starts and runs normally.
The menus are accessible.
The lamp is lit.
Upgrade the software to the latest version or reinstall the
projector software.
Confirm that all image adjustments are set
to factory defaults
Confirm that the cable and source signal
Are good.
What is the problem?
No image at all.
Vertical or horizontal
lines.
Sparkly picture.
Clusters of dark pixels.
Dim image
Bad or missing tint or color.
Missing logo,VGA,composite
Video, or S-video.
Distorted image, noisy, rolling,
Torn,frozen,”plaid” repeated,
Or shifted image.
57
To Next Page
Loading...
