User’s Manual 8-12
Troubleshooting
USB floppy diskette drive
For further information, please refer to Chapter 3, Hardware, Utilities and 
Options. 
PC Card
For further information, please refer to Chapter 3, Hardware, Utilities and 
Options.
Problem Procedure
Drive does not operate Check the connection between the computer and 
the drive to ensure that it is properly attached.
Some programs run 
correctly but others do 
not
The computer's software or hardware 
configuration may be causing a problem - ensure 
that these configurations match your 
requirements (refer to any relevant 
documentation, for example that supplied with 
any software in use, for further information).
You cannot access the 
external floppy diskette 
drive
Try another floppy diskette in the drive - if you are 
able to access this disk then it indicates the 
original disk and not the drive is probably causing 
the problem.
If you are still unable to resolve the problem, 
contact your reseller, dealer or service provider.
Problem Procedure
PC Card error occurs  Remove the PC Card from the computer and 
then reinsert it in order to ensure it is firmly 
connected.
In the event that the PC Card is attached to an 
external peripheral device, ensure that this 
connection is properly made.
If the problem persists, then you should refer to 
the documentation supplied with your PC Card 
for further information.
If you are still unable to resolve the problem, 
contact your reseller, dealer or service provider.