User’s Manual 3-14
Hardware, Utilities and Options
Windows Mobility
Center
Mobility Center is a utility for accessing several
mobile PC settings quickly in one window. A
default maximum of eight tiles are provided by
the operating system, and the additional two tiles
are added to your Mobility Center.
■ Lock Computer:
This can be used to lock your computer
without turning it off. This has the same
function as selecting Lock from the Start
menu (click Start, point to the arrow icon
( ) and then select Lock
from the menu).
■ TOSHIBA Assist:
This can be used to open TOSHIBA Assist if
it is already installed in your computer.
TOSHIBA USB Sleep
and Charge Utility
This utility is able to either enable or disable the
USB Sleep and Charge function.
Shows the positions of USB ports that support
the USB Sleep and Charge function and displays
the battery's remaining capacity.
To start this utility, click Start -> All Programs ->
TOSHIBA -> Utilities -> USB Sleep and
Charge.
Trusted Platform
Module (TPM)
The TPM (Trusted Platform Module) is a security
encryption device for the hard disk drive.
BIOS setup and Infineon TPM Software
Professional Package must be configured in
order to use TPM.
To enable TPM through the BIOS setup:
1. Turn on the computer while pressing the F2 key. When the TOSHIBA
Leading Innovation >>> screen appears, release the F2 key.
2. Set the TPM in the Security tab to Enabled.
3. Press the F10 key.
4. Press the Y key to accept the changes. The computer will restart.
In order to change the TPM setting when the Hide TPM setting is currently
set to Yes, switch the Hide TPM setting from Yes to No.
To Next Page
Loading...
