User’s Manual 7-7
HW Setup
Built-in LAN
This feature enables or disables the Built-in LAN.
Device Config
Device Configuration
This option lets you set the device configuration.
PCI Express Link ASPM
This feature lets you set the PCI Express power-saving configuration.
Parallel/Printer
Some models are equipped with Parallel/Printer tab. This tab lets you set
the Parallel Port Mode. Use the Windows Device Manager to make settings
for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
Enabled Enables Built-in LAN functions (Default).
Disabled Disables Built-in LAN functions.
All Devices BIOS sets all devices.
Setup by OS Operating system sets devices that it can control
(Default).
Enabled Enables power-saving when the PCI Express
device is not being used.
Disabled Disables power-saving for performance.
Auto Power-saving is enabled when the battery power
supply is used and the PCI Express device is not
being used (Default).
ECP Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP (Default).
Standard
Bi-directional
This setting should be used with some other
parallel devices.
To Next Page
Loading...
