User’s Manual I-1
TECRA M3
Appendix I
Parts Numbers
The computer configuration and parts numbers, printed on a label on the
bottom of the computer, indicate the CPU, LCD, memory, HDD and
communication devices.
Configurations
The following table shows the computer configuration indicated on a label.
Shaded areas indicate abbreviations used on the label. The explanations
are to the left of the shading. Abbreviations are not limited to those in this
chart. They may change without notice.
CPU LCD Memory HDD Communication
Pentium M
1.6G PM1.6 14.1”TFT-XGA 14X 256+0MB 256M 40GB 40 802.11g without BT
antenna
WLg
1.73G PM1.7 14.1”TFT-
SXGA+
14+ 256+256MB 512M 60GB 60 802.11g with BT antenna WLg/BTA
1.86G PM1.86 256+512MB 768M 80GB 80 802.11a/g combo without
BT antenna
WLag
2.0AG PM2.0A 256+1024M
B
1280M 100GB 100 802.11a/g combo with BT
antenna
WLag/
BTA
2.13G PM2.13 512+0MB 512M 802.11g/BT integrated WLg/BT
512+512MB 1024M 802.11a/g combo/BT
integrated
WLag/BT
512+1024M
B
1536M Wireless LAN Antenna
and BT Antenna only
WLA/BTA
1024+0MB 1024M
1024+1024
MB
2048M
To Next Page
Loading...
