User’s Manual 8-17
Optional Devices
3. Close the lid and slide the lock to the lock position.
Figure 8-20 Closing the lid
For details on inserting the Slim Select Bay HDD adaptor in the computer’s
Slim Select Bay slot, refer to Chapter 4, Operating Basics.
USB floppy disk drive
The USB floppy disk drive module can be connected to the USB port. For
details on connecting the USB floppy disk drive module, refer to Chapter 4,
Operating Basics.
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. The computer supports VGA and Super VGA video
modes. To connect a monitor, follow the steps below.
1. Turn the computer’s power off.
2. Connect the monitor cable to the external monitor port.
Figure 8-21 Connecting the monitor cable to the external monitor port
3. Turn the monitor’s power on.
4. Turn the computer’s power on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
Monitor cable
External monitor port
To Next Page
Loading...
