User’s Manual 7-3
HW Setup
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer. Select from the
following settings:
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
*
1
The floppy disk drive will be used to start the computer when there is a
bootable disk contained in the external drive. If SD memory is installed as
well, the external floppy disk drive will be checked first, followed by the SD
memory device itself.
*
2
The optical media drive will be used to start the computer when there is a
bootable disk contained in the drive.
HDD −> FDD −> CD-
ROM −> LAN
The computer looks for bootable files in the
following order: HDD, floppy disk drive*
1
, CD-
ROM*
2
and LAN (Default).
FDD −> HDD −> CD-
ROM −> LAN
The computer looks for bootable files in the
following order: floppy disk drive*
1
, HDD, CD-
ROM*
2
and LAN.
HDD −> CD-ROM −>
LAN −> FDD
The computer looks for bootable files in the
following order: HDD, CD-ROM*
2
, LAN and
floppy disk drive*
1
.
FDD −> CD-ROM −>
LAN −> HDD
The computer looks for bootable files in the
following order: floppy disk drive*
1
, CD-ROM*
2
,
LAN and HDD.
CD-ROM −> LAN −>
HDD −> FDD
The computer looks for bootable files in the
following order: CD-ROM*
2
, LAN, HDD, floppy
disk drive*
1
.
CD-ROM −> LAN −>
FDD −> HDD
The computer looks for bootable files in the
following order: CD-ROM*
2
, LAN, floppy disk
drive*
1
and HDD.
U Selects the USB floppy disk drive.
N Selects the network.
1 Selects the primary HDD.
2 Selects the secondary HDD.
C Selects the CD-ROM*
2
.
M Selects the USB Memory.
To Next Page
Loading...
