Toshiba TOSVERT VF-AS3 Option Instruction Manual

2
E6582171
■ Limitation of use
■ Handling in general
WARNING
Prohibited
• Never use the option with any device other than applicable TOSVERT series inverters.
This will result in accident.
WARNING
Disassembly
inhibited
• Never disassemble, modify or repair the option.
This can result in electric shock, fire or other injury. Please call your Toshiba distributor for repairs.
Prohibited
• Do not place or insert any kind of objects (electrical wire cuttings, rods, wires etc.) inside the option.
This can result in damage or fire.
• Do not allow water or any other fluids come in contact with the option.
This can result in damage or fire.
Mandatory
action
• Immediately turn the power off the inverter with the option begin to emit to smoke, an unusual odor,
unusual sounds or blind display.
Continuous use of the inverter and the option in such state will cause fire. If the inverter and the option
are left to be turned on in that state, it can cause fire. Please call your Toshiba distributor for repairs.
CAUTION
Prohibited
• Do not apply shock (falling, etc.) on the option.
This can result in damage or malfunction.
• Do not touch the connector to the inverter (refer to Names of the Parts).
This can result in damage or accident.
Mandatory
action
• Operate under the environmental conditions prescribed in this manual.
Operations under any other condition can result in malfunction.

Toshiba TOSVERT VF-AS3 Specifications

General

Model	TOSVERT VF-AS3
Category	Inverter
Overload Capacity	150% for 60 seconds
Cooling Method	Forced Air Cooling
Control Method	V/f control, Sensorless vector control
Braking Unit	Built-in
Communication Protocols	Modbus RTU, DeviceNet, Profibus DP
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault
Enclosure	IP20
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m