E6581090
6
I
Attach warning labels
Shown here are examples of warning labels to prevent, in advance, accidents in relation to
inverters, motors and other equipment.
If the inverter has been programmed for auto-restart function after momentary power failure or
retry function, place warning labels in a place where they can be easily seen and read.
If the inverter has been programmed for restart
sequence of momentary power failure, place
warning labels in a place where they can be
easily seen and read.
(Example of warning label)
If the retry function has been selected, place
warning labels in a location where they can be
easily seen and read.
(Example of warning label)
Warning
(Functions programmed
for restart)
Warning
(Functions
programmed for retry)
Do not go near motors and equipment.
Motors and equipment that have stopped
temporarily after momentary power failure will
restart suddenly after recovery.
Do not go near motors and equipment.
Motors and equipment that have stopped
temporarily after an alarm will restart
suddenly after the specified time has
elapsed.
To Next Page
Loading...
Need help?
General