E6581299
- 4 -
1. Introduction
Thank your for purchasing a “USB-to-serial conversion unit (USB001Z unit),” an optional
device for the TOSVERT series inverters.
The USB-to-serial conversion unit makes it possible to use a USB port on your computer as
a COM port for connecting it to an inverter for data communications.
This instruction manual explains how to connect the USB-to-serial conversion unit, and for
correct use of the USB-to-serial conversion unit. Please read this manual carefully along
with the instruction manual for your inverter and the communication function manual.
When using the USB-to-serial conversion unit, keep this manual handy for future
maintenance and inspections.
[Explanation about the type of the USB-to-serial conversion unit]
USB 001 Z
2
Revision No.
Cable length (Z: No cable)
USB option No.
USB option
[Accessories check]
The USB-to-serial conversion unit is composed of the items listed below.
Unpack the product and check for missing or damaged components.
(1) USB-to-serial conversion unit ...................................... 1
(USB001Z)
(2) USB-to-serial Conversion Unit Instruction Manual ....... 1
(E6581282)
(3)CD-ROM .......................................................................... 1
- Device driver
- Uninstaller
- Instruction Manual (Detailed version)
(E6581298: Japanese manual, E6581299: this English manual)
[Note]
This unit does not include an inverter-unit connection cable or a personal computer-unit
connection cable. Purchase these cables separately. (Refer to page 5.)
[Trademark]
Windows® is listed above as the abbreviation for a Microsoft® Windows® operating system.
Microsoft®, Windows®, Windows® Xp, Windows Vista®, and Windows® 7 are registered
trademarks or trademarks of the US Microsoft Corporation in the USA and other countries.
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
RS485 (2-wire
type)
USB
LOGIC
USB
Option Unit
Instruction
Manual
To Next Page
Loading...