Toshiba Z3030 Series - Advanced Picture Settings; Active Backlight Control; Cinema Mode; Film Stabilization

PICTURE
Picture settings
OK
Active Backlight Control
On
Cinema mode
On
Film Stabilization
Off
Active Vision M100 On
xvYCC selection
MENU
Back
EXIT
Watch TV
1/2
24
Picture controls continued
In the PICTURE menu press e to select Cinema
mode.
1
Press
z
or
x
to select On or Off.
NOTE: When a DVD with subtitles is being played
this mode may not work correctly.
2
If there are lines or jagged edges in the film or programme
being viewed, selecting Cinema mode can help correct
this by smoothing out the picture.
Cinema mode
When Active Backlight Control is activated it will
automatically optimise the backlighting levels for
dark scenes.
Active Backlight Control
In the PICTURE menu press e to select Active
Backlight Control.
Press
z
or
x
to select On or Off.
1
2
The Film Stabilization feature allows the adjustment
of motion smoothness.
Film Stabilization
In the PICTURE menu press e to select Film
Stabilization.
Press
z
or
x
to select Standard, Smooth or
Off.
1
2
The colour range xvYCC is an international standard and
enables a wider colour range than conventional signals.
xvYCC selection (HDMI only)
In the PICTURE menu press e to select xvYCC
selection.
Press
z
or
x
to select On, Off or Auto.
1
2
When Active Vision M100 is selected this feature will
reduce ‘smearing’ and on video sources will reduce
picture judder.
Active Vision M100
In the PICTURE menu press e to select Active
Vision M100.
Press
z
or
x
to select On or Off.
1
2
PICTURE
Picture settings
OK
Active Backlight Control
On
Cinema mode
On
Film Stabilization
Off
Active Vision M100 On
xvYCC selection
MENU
Back
EXIT
Watch TV
1/2
PICTURE
Picture settings
OK
Active Backlight Control
On
Cinema mode
On
Film Stabilization
Off
Active Vision M100 On
xvYCC selection
MENU
Back
EXIT
Watch TV
1/2
gg