Tosima H1 - Page 19

1). Take out the dirty water tank, open the dirty water tank lid and empty the dirty water and
debris first.
2). Take out the float and HEPA filter from the dirty water tank.
3). Clean the dirty water tank, the float, and the lid with a cleaning tool and rinse them with
clean water.
4). Dry the dirty water tank and its lid.
1). Take out the HEPA filter from the dirty water tank.
2). Clean it with a cleaning tool and rinse it.
3). Dry the HEPA filter.
4). Assemble the HEPA filter, and dirty water tank lid, float and put the dirty water tank back to
H1 once they are dry.
4.Roller Brush Cleaning
1). Take out the roller brush as guided.
2). Use the cleaning tool to remove the debris and hair wrapped around the roller brush,
then rinse it with clean water.
3). Replace with another dry and clean roller brush and put it back into the brush base.
4). Dry the wet roller brush for your next use.
5.Brush Guard Cleaning
1). Take out the brush guard as guided.
2). Use the cleaning tool to remove the debris, then rinse it with clean water.
3). Dry it and put it back to the brush base.
3. HEPA filter Cleaning
ENGLISH 19